# Best Visitor Identification Tools for HubSpot in 2026

Five visitor identification tools judged on what they do inside HubSpot records, from duplicate matching and overwrite rules to lifecycle handling and the plan each integration needs.

- Warmly is the best visitor identification tool for HubSpot-only teams, reading lifecycle and owner data without overwriting it.
- Leadfeeder matches companies on name, domain and location before linking them in HubSpot.
- RB2B creates named US contacts and never overwrites existing HubSpot contact data.
- Snitcher lets you sync only ICP-matching visitors, mapped into standard or custom HubSpot properties.
- Leadinfo checks domain, phone and registry number before creating HubSpot companies, suiting European teams.

These picks apply to B2B teams that use HubSpot as the system of record and connect a native integration, not Slack-only alerts. HubSpot does not deduplicate companies created by third-party sync apps by domain, so set each tool's matching and sync filters before the first sync.

## How We Chose These Visitor Identification Tools For HubSpot

The five visitor identification tools below were judged on what matters once data reaches HubSpot, namely how each one matches existing records, what it writes or leaves alone, and how [HubSpot treats companies created by third-party sync apps](https://knowledge.hubspot.com/records/deduplication-of-records). A tool that only posts alerts to Slack was not enough to make the list.

In [website visitor identification](https://growthtribune.com/website-conversion/visitor-identification/), a match is only as useful as the record it lands on. Each tool had to clear three bars:

- A native HubSpot integration that writes identified companies or contacts into HubSpot records.
- Documented matching against companies and contacts that already exist in HubSpot.
- Self-serve documentation a buyer can read before signing.

Each tool was then compared on six criteria, in this order:

1. Duplicate prevention, meaning how it matches existing companies and contacts.
2. What it writes to HubSpot, and what it never overwrites.
3. How it handles lifecycle stage and record owner.
4. Segmentation and sync filters.
5. Identification level (company or person) and region.
6. The plan or meter the HubSpot integration depends on.

All five tools met the bar. HubSpot's native buyer intent is covered in its own section as the option of adding no tool at all.

Match rates vary with traffic mix and region. Any match-rate figure a vendor publishes is its own claim, not an independent measurement.

## Best Visitor Identification Tools For HubSpot Comparison Table

Warmly reads lifecycle, owner and deal data and writes only its own fields plus empty standard company fields, Leadfeeder only matches companies automatically when it is sure, and RB2B adds named US contacts, so the right pick depends on whether HubSpot needs accounts, people or both. Snitcher and Leadinfo round out the list for teams that want filtered company records.

1. **Warmly**: Owner-aware person and company data
2. **Leadfeeder**: Cautious company matching with visit notes
3. **RB2B**: Named US contacts
4. **Snitcher**: ICP-only syncs into custom properties
5. **Leadinfo**: European teams wanting registry-aware matching

The table below sets the five tools side by side on how they treat HubSpot records. Pricing model and free trial come from each brand record.

**How each tool handles HubSpot records**

| Tool | Pricing model | Free trial | Identification level | Writes to HubSpot | Duplicate guard | On existing records |
| --- | --- | --- | --- | --- | --- | --- |
| Warmly | Paid |  | Person and company | Companies, contacts, Warmly fields | Domain and email | Warmly fields always overwritten |
| Leadfeeder | Freemium | 14 days, no card needed | Company, plus contacts | Companies, notes, deals, tasks | Name, domain, location | No enrichment of existing |
| RB2B | Freemium | 7 days, no card needed | US person, global company | Contacts, companies, RB2B fields | Checks existing records first | Never overwrites contact data |
| Snitcher | Paid | 14 days, no card needed | Company-level | Contacts, companies, deals | ICP sync filters | Creates or updates records |
| Leadinfo | Paid | 14 days, no card needed | Company-level | Companies, notes, deals, tasks | Domain, phone, registry number | Links to existing companies |

Read the table from left to right in the order a HubSpot admin worries about. Identification level tells you whether HubSpot gets accounts, people or both. The second column shows which HubSpot objects fill up. The duplicate guard is what stops a second record, and the last column says what happens to a record sales already owns.

RB2B and Warmly identify individual people. Leadfeeder, Snitcher and Leadinfo work mainly at company level.

## Warmly

Warmly reads lifecycle stage, owner and deal data from HubSpot and writes its own Warmly fields plus empty standard company fields, and since [HubSpot agreed to acquire Warmly in June 2026](https://www.cmswire.com/digital-experience/hubspot-acquires-warmly-to-boost-ai-sales-agents/) it is the option most tied to HubSpot's own roadmap.

**Warmly**

Warmly is a B2B go-to-market platform whose AI agents identify website visitors and engage them through chat, email and retargeting. For HubSpot teams it pairs person and company identification with read access to owner, lifecycle and deal data.

**Verdict:** The pick for teams that want HubSpot's owner, lifecycle and deal context read before anything is written, with writes kept to Warmly fields and empty standard company fields.

**Identification level:** Person and company. Warmly creates company records and contact records for newly identified visitors.

**What it writes to HubSpot:** New companies and contacts, plus its own Warmly custom fields. Lifecycle stage is not among the fields Warmly writes, and its own custom fields are always overwritten with fresh values.

**Duplicate handling:** Warmly matches companies on domain, stripping the protocol, www and any path, and matches people on email. On a match it creates no new record and updates only Warmly fields. With "Create or update companies" turned on, standard company fields follow fixed rules:

- Owner fills only if empty and never changes once set.
- Website is never overwritten and is used for matching.
- Name, Number of Employees, City, State, Zip and Country fill only if empty.

**Lifecycle and owner:** Warmly reads lifecycle stage and owner on contacts, and pipeline, stage and owner on deals, but it does not set lifecycle stage. New records go to the HubSpot user who set up the integration, so that person should be a HubSpot admin and owner assignment needs a plan in HubSpot.

**Pricing:** Warmly's current products and contract terms:

**Warmly pricing**

| Plan | Price | Billing | Notes |
| --- | --- | --- | --- |
| AI Web-Deanonymization (AI Web-Deanonymization) | $10,000 | per year |  |
| Inbound Chat (Inbound Chat) | $20,000 | per year |  |
| AI Inbound Autopilot (AI Inbound Autopilot) | $30,000 | per year |  |

**Best fit:** HubSpot-only teams that want person and company signals alongside owner and deal context for routing. Teams that only need account records may find a company-level tool simpler to run.

**Limitations:**

- Concurrent API calls to HubSpot are capped at 2 and batched.
- Contacts from chat are created only when company information is available.
- Custom HubSpot fields that Warmly should read are added one at a time and need a re-sync.
- Warmly's roadmap now sits with HubSpot. Current customers keep their contracts, pricing, account teams and integrations unchanged, and deeper HubSpot integration is planned.

Teams weighing person-level alerts against Warmly's agents can compare the two in [RB2B vs Warmly](https://growthtribune.com/rb2b-vs-warmly-which-fits-your-team/).

## Leadfeeder

Leadfeeder matches visiting companies to existing HubSpot companies on name, domain and location, and only matches automatically when it is sure, which makes it the cautious choice for an account-based HubSpot portal. Leadfeeder is part of Dealfront.

**Leadfeeder**

Leadfeeder shows B2B marketing and sales teams which companies visit their site and syncs them to their CRM. In HubSpot it works account-first, attaching visit history to the matched company.

**Verdict:** A cautious company matcher for teams that want accounts in HubSpot with visit history attached.

**Identification level:** Company-level, with contacts it can push alongside the company.

**What it writes to HubSpot:** Identified companies connect to HubSpot companies and deals, manually or by automation. Visits are added to the connected company as notes, with historical visits optional on a manual connection. Automation can also create a deal and a task.

**Duplicate handling:** Companies are matched on name, website domain or subdomain, and country, city and zip. Leadfeeder's help centre says it won't match automatically unless it is sure. Contacts are matched by email, then by name, and the contact push can be turned off. Leadfeeder treats different locations as unique companies, so a multi-location business can appear as duplicates in HubSpot through automation.

**Plan or meter:** The integration itself costs nothing extra, but each record sent to the CRM costs 1 credit. Credits are the real cost driver of a busy sync. Company matching runs once a day and within 10 minutes of a newly identified company, while visits update once a day in batches, not in real time.

**Pricing:** Leadfeeder's current plans:

**Leadfeeder pricing**

| Plan | Price | Billing | Notes |
| --- | --- | --- | --- |
| Lite | €0 | per month |  |
| Discover | €79 | per month, billed annually |  |
| Activate | €369 | per month, billed annually |  |
| Scale | €599 | per month, billed annually |  |
| Enterprise | Custom pricing | per custom |  |

**Best fit:** B2B teams, including teams in Europe, that want company-level accounts and visit notes in HubSpot rather than named people.

**Limitations:**

- One CRM per Leadfeeder account.
- Existing HubSpot companies cannot be enriched.
- No retroactive sync from before an automation was set up, and an automation processes each company only once.
- Changes made in HubSpot don't alter existing matches.
- On G2, product direction is Leadfeeder's lowest-scored area, while reviewers most often tag it for lead generation and insights.

## RB2B

RB2B creates a HubSpot contact for each newly identified US visitor and only fills its own RB2B properties on records that already exist, so it adds named people without rewriting what sales has already entered.

**RB2B**

RB2B identifies website visitors and sends their details to Slack, Teams and CRMs. For HubSpot teams its value is named US contacts created straight into the CRM.

**Verdict:** The pick when sales wants named US visitors created as HubSpot contacts.

**Identification level:** Person-level for US visitors only, with name, title, LinkedIn profile and email, plus company-level identification worldwide. RB2B's site says it identifies 70-80% of website traffic, which is the vendor's own figure, not an independent one.

**What it writes to HubSpot:** When a contact or company does not exist, RB2B creates it. New contacts carry name, title, business email, industry, location and page view history. New companies carry name, website, estimated revenue and employee count. Page views appear in HubSpot activity as "RB2B for CRM".

**Duplicate handling:** RB2B reads HubSpot data to check for existing contact or company records before it creates new ones. On existing records it updates only the RB2B properties, and its FAQ says it will never overwrite a contact's existing data.

**Lifecycle and owner:** RB2B reads lifecycle stage and lead status from HubSpot rather than setting them. Contacts arrive labelled "Non-marketing Contact" because RB2B does not tag leads as marketing contacts by default, which matters for any lifecycle workflow you build.

**Plan or meter:** HubSpot and Salesforce sit in the Pro and Pro+ plans. Slack and Teams are included on every plan.

**Pricing:** RB2B's current plans are in the table below, and the full breakdown of [RB2B pricing](https://growthtribune.com/rb2b-pricing-plans-limits-and-total-cost/) covers limits and total cost.

**RB2B pricing**

| Plan | Price | Billing | Notes |
| --- | --- | --- | --- |
| Free | $0 | per month |  |
| Starter | $79 | per month |  |
| Pro | $149 | per month |  |
| Pro+ | $199 | per month |  |

**Best fit:** US-focused outbound and sales teams that want named contacts in HubSpot. Teams selling mainly into the UK or EU get company-level data only.

**Limitations:**

- The Hot Leads tag is not sent to HubSpot.
- For visitors HubSpot already knows, "RB2B Captured At" and "RB2B Captured URL" stay blank.
- The HubSpot sync needs Pro or Pro+.
- "Lack of Integration" is the most-tagged complaint about RB2B on G2, even though reviewers most often tag it for easy setup and ease of use.

## Snitcher

Snitcher lets you set filters that decide which identified visitors reach HubSpot at all, and maps company data such as industry, employee count and revenue into standard or custom HubSpot properties.

**Snitcher**

Snitcher shows which companies visit a site and their intent, for sales, marketing and RevOps teams. In HubSpot its strength is control over what syncs and where the data lands.

**Verdict:** Configurable sync filters for teams that want only ICP accounts in HubSpot.

**Identification level:** Company-focused. What Snitcher maps into HubSpot is firmographic account data, so plan for it as a company-level tool.

**What it writes to HubSpot:** Snitcher can create or update contacts, companies and deals when visitors match your criteria. Default mappings send Company Name, Domain (to Website), Industry, Employee Count, Revenue and Country, and you can add custom HubSpot properties. Snitcher also lists deal pipeline sync, bi-directional sync and webhook notifications.

**Duplicate handling:** Because HubSpot does not deduplicate companies created by sync apps by domain, the practical guard with Snitcher is the filter itself. Snitcher recommends syncing only ICP-matching visitors, and a narrow filter means fewer new company records to collide with existing ones.

**Lifecycle and owner:** Follow-up, such as notifying sales when a high-value account visits, is built with HubSpot workflows rather than inside Snitcher.

**Pricing:** Snitcher's current plans:

**Snitcher pricing**

| Plan | Price | Billing | Notes |
| --- | --- | --- | --- |
| Platform 0-50 company IDs (Platform) | $79 | per month |  |
| Platform 51-100 company IDs (Platform) | $109 | per month |  |
| Platform 101-250 company IDs (Platform) | $149 | per month |  |
| Platform 251-500 company IDs (Platform) | $199 | per month |  |
| Platform 501-750 company IDs (Platform) | $269 | per month |  |
| Platform 751-1,000 company IDs (Platform) | $339 | per month |  |
| Platform 1,001-2,000 company IDs (Platform) | $419 | per month |  |
| Platform 2,001-3,000 company IDs (Platform) | $529 | per month |  |
| Platform 3,001-4,000 company IDs (Platform) | $649 | per month |  |
| Platform 4,001-5,000 company IDs (Platform) | $779 | per month |  |
| Platform Custom (Platform) | Custom pricing | per custom |  |

**Best fit:** Lean B2B teams and RevOps owners who want filtered account data mapped into custom HubSpot properties.

**Limitations:**

- Lifecycle, routing and alerts live in your own HubSpot workflows, so a team without a HubSpot admin carries more setup.
- Sync quality rests on how tightly the filters are defined.
- Loose filters bring back the clean-up work of any sync app.

## Leadinfo

Leadinfo checks whether a visiting company already exists in HubSpot using its domain, phone number and chamber of commerce number before it creates anything, and its HubSpot integration sits on the Scale and Pro packages.

**Leadinfo**

Leadinfo links website visits to company data so B2B sales and marketing teams can generate leads. In HubSpot it creates or links company records and adds the visits as notes.

**Verdict:** A company-level option with registry-aware matching, suited to European B2B teams.

**Identification level:** Company-level. Leadinfo sends companies, visits, deals and tasks to HubSpot rather than named people.

**What it writes to HubSpot:** Leadinfo creates companies, links visitors to existing companies, shows the pages a company visits, creates deals and sets up tasks. Visits can be sent as a note on the company profile. Sending runs automatically on triggers, with the actions "Create new companies" or "Connect with existing companies", or manually with the "Link to HubSpot" button. You choose which fields to send.

**Duplicate handling:** Before it creates a company, Leadinfo checks for an existing one on data points such as domain, phone number and chamber of commerce number. Matching on a registry number as well as a domain suits markets where companies carry a chamber of commerce number.

**Plan or meter:** The HubSpot integration is only available on the Scale and Pro packages.

**Pricing:** Leadinfo's current plans:

**Leadinfo pricing**

| Plan | Price | Billing | Notes |
| --- | --- | --- | --- |
| Starter | $107 | per month |  |
| Scale | $226 | per month |  |
| Pro | $507 | per month |  |

**Best fit:** European SMB and mid-market teams that want company records and visit notes in HubSpot, not named people.

**Limitations:**

- Data reaches HubSpot only once a company is connected, after which future visits are always shared.
- The HubSpot sync needs the Scale or Pro package, so Starter is not enough.

## Visitor Identification Software Selection For HubSpot Teams

Choose a HubSpot visitor identification tool by the records you want in the CRM. Named US contacts point to RB2B, cautious company matching to Leadfeeder, and owner-aware person and company data to Warmly.

The first fork is identification level. RB2B and Warmly identify individual people, while Leadfeeder, Snitcher and Leadinfo work mainly from the company. If sales works accounts, a company-level tool keeps HubSpot tidier. If sales calls people, a person-level tool earns its place. The trade-offs of [company-level vs person-level visitor identification](https://growthtribune.com/company-level-vs-person-level-visitor-identification/) go deeper on coverage, match confidence and privacy law.

Match your situation to a pick:

- **HubSpot-only team wanting person and company signals with owner and deal context:** Warmly. It reads lifecycle, owner and deal data, and its roadmap now sits with HubSpot.
- **Account-based team in any region wanting company records with visit notes:** Leadfeeder. It matches only when it is sure and adds visits as notes, at 1 credit per record sent.
- **US-focused outbound team wanting named contacts:** RB2B on Pro or Pro+, the plans that hold the HubSpot integration.
- **RevOps owner who wants only ICP accounts in custom properties:** Snitcher, with filters set before the first sync.
- **European SMB on a higher package:** Leadinfo on Scale or Pro, with registry-aware matching.

Each pick also has a team it does not suit. Warmly is more than an account-only team needs. Leadfeeder will not enrich companies already in HubSpot and connects to one CRM per account. RB2B gives UK and EU traffic company-level data only. Snitcher leaves lifecycle and routing to HubSpot workflows, which needs an admin. Leadinfo's entry package has no HubSpot sync.

Before a demo, answer four questions:

- [ ] Do you need companies, named people or both in HubSpot?
- [ ] Which HubSpot objects does the tool write, from companies and contacts to deals, notes and tasks?
- [ ] What does the tool never overwrite on records that already exist?
- [ ] Which plan or meter holds the HubSpot integration?

A tool that answers all four in its help centre is easier to run than one that answers them on a sales call.

## How Do Visitor Identification Tools Prevent Duplicates In HubSpot

HubSpot deduplicates contacts by email and companies by domain, but companies created through the API, including third-party sync apps, are not deduplicated by domain, so each visitor identification tool's own matching decides whether duplicates appear. That puts the burden on the tool's matching rules and on your setup before the first sync.

Contacts are the easier half. HubSpot still deduplicates them on the Email property. Warmly matches people on email, Leadfeeder on email and then name, and RB2B checks for existing contacts before it creates one. Companies are where duplicates build up.

**How each tool matches existing HubSpot records**

| Tool | Matches companies on | Matches people on |
| --- | --- | --- |
| Warmly | Domain | Email |
| Leadfeeder | Name, domain, location | Email, then name |
| RB2B | Existing records checked first | Existing records checked first |
| Leadinfo | Domain, phone, registry number | Companies, not contacts |

Snitcher's guard is its sync filter rather than a matching key. Syncing only ICP-matching visitors keeps the number of new company records low.

Even good matching leaves gaps. Leadfeeder treats each location of a business as a unique company, so its automation can create duplicates for multi-location firms. It also processes each company only once, and changes made in HubSpot don't alter an existing match. Warmly creates no new record on a domain match, which makes a clean domain field on existing companies worth more than any setting.

Set these up before the first sync:

1. Fill in the company domain name on existing HubSpot companies. Warmly matches on domain, and HubSpot uses it for its own company deduplication.
2. Decide whether a multi-location business should be one HubSpot company, since Leadfeeder sees each location as its own company.
3. Turn off the contact push in Leadfeeder when you only want accounts in HubSpot.
4. Narrow Snitcher's sync filters to ICP accounts so fewer records are created at all.

For field mapping, permissions and identity matching in more depth, the playbook on how to [connect visitor identification to your CRM](https://growthtribune.com/how-to-connect-visitor-identification-to-your-crm/) walks through the full setup.

## How To Update HubSpot Lifecycle Stages From Visitor Identification Data

Visitor identification tools mostly write their own properties and leave lifecycle stage to HubSpot. Warmly reads lifecycle stage without writing it, and RB2B adds contacts as non-marketing, so a HubSpot workflow is the place to move a record's stage. Snitcher also points to HubSpot workflows for follow-up.

That is a sensible split. The tool reports what happened on the site, and HubSpot decides what it means for the funnel. Lifecycle rules then stay in one place that your team owns, instead of five vendors' defaults.

RB2B reads both lifecycle stage and lead status, and Warmly reads lifecycle stage, owner and deal data, so both can use HubSpot context without changing it. Leadfeeder and Leadinfo can create deals and tasks, which gives a workflow a clear event to react to.

Build lifecycle updates in this order:

- [ ] Let the tool write only its own properties, such as the RB2B properties or the Warmly fields.
- [ ] Define the trigger in HubSpot, for example a repeat visit to the pricing page by an ICP company.
- [ ] Build a HubSpot workflow that moves lifecycle stage or lead status when the trigger fires.
- [ ] Decide when an RB2B contact should become a marketing contact, since it arrives as non-marketing.
- [ ] Set owner assignment rules in HubSpot before new records start to arrive.

Owner assignment needs the same care. Warmly assigns new records to the HubSpot user who set up the integration, so a rotation or territory workflow should pick them up. Warmly never changes an owner once it is set, which protects accounts that sales already works.

Keep the trigger narrow at first. One rule, such as an ICP company returning to a high-intent page, is easier to trust than a score built from every visit.

## How To Segment Identified Visitors In HubSpot

The cleanest HubSpot segments come from filtering before the sync. Snitcher lets you sync only visitors that match your criteria, and Leadfeeder lets you turn off the contact push so only companies arrive. Cleaning HubSpot after a loose sync takes longer than never creating the records at all.

Once records arrive, segment on what each tool writes:

- **Vendor properties:** RB2B properties on contacts and companies, and Warmly fields on matched records.
- **Visit notes:** Leadfeeder and Leadinfo add visits as notes on the company, which gives reps context on the record.
- **Firmographics:** Snitcher maps industry, employee count, revenue and country into standard or custom properties.

Three segments cover most teams:

- ICP accounts with a visit in the last week, for sales follow-up.
- Named US visitors who are not yet marketing contacts, for a decision on nurture.
- Existing customers, to exclude from sales alerts.

Build the exclusion list first. Customers and partners visit often, and without a suppression list they crowd the segments sales actually reads.

Choose fields with segments in mind. Leadinfo lets you pick which fields it sends, and Snitcher maps into custom properties, so decide which properties your lists will filter on before you map anything.

Keep the vendor's properties apart from your own. A segment built on a tool's fields will break if you switch tools, so copy the values that matter into properties your team owns through a workflow.

To keep noise out of these lists, the playbook on how to [filter low-intent website visitor alerts](https://growthtribune.com/how-to-filter-low-intent-website-visitor-alerts/) covers page context, account fit, repeat visits and suppression.

## Do You Need A Visitor Identification Tool If HubSpot Has Buyer Intent

[HubSpot's buyer intent connects anonymous visitors to companies by IP address and uses HubSpot Credits](https://knowledge.hubspot.com/reports/use-buyer-intent), so it covers company-level signals, while named people and stricter record matching still need a separate tool. Start with buyer intent if company-level signals inside HubSpot are enough for your team.

Buyer intent stores company-level website activity and does not identify individual visitors. It is available on Starter, Professional or Enterprise editions of Marketing, Sales, Service, Data and Content Hub. It needs HubSpot Credits, either purchased or included in a seat plan, and both adding companies and tracking their intent signals use credits.

> **Note:** Credit meters sit on both sides of this decision. HubSpot buyer intent spends HubSpot Credits to add companies and track their signals, and Leadfeeder charges 1 credit for each record it sends to the CRM. Estimate how many identified companies you expect before you compare costs.

Add a separate tool when buyer intent stops short of what sales needs:

- **Named people:** RB2B for US visitors, or Warmly for person and company data.
- **Stricter matching and visit notes:** Leadfeeder or Leadinfo.
- **Filters before the sync:** Snitcher, which decides what reaches HubSpot at all.

Buyer intent also keeps its company-level website activity inside HubSpot.

HubSpot's agreement to acquire Warmly shows it moving visitor intent closer to the CRM. For current Warmly customers, contracts and integrations stay unchanged for now.

## Is Website Visitor Identification Legal For HubSpot Users

Under the [ICO's PECR guidance, a site must get prior consent before storing or accessing information on a visitor's device](https://ico.org.uk/for-organisations/direct-marketing-and-privacy-and-electronic-communications/guidance-on-the-use-of-storage-and-access-technologies/what-are-the-pecr-rules/) unless an exception applies, and that duty sits with the site owner whichever visitor identification tool feeds HubSpot. Where the vendor finds its data does not change it.

PECR Regulation 6 says a person must not store or gain access to information on a user's device unless an exception in Schedule A1 applies. Otherwise you must tell users what the technologies are and what they do, and get prior consent to the UK GDPR standard. The rules cover any use of storage and access technologies, and some uses also process personal data.

The consent duty does not turn on whether a tool names a company or a person. It turns on whether information is stored on, or read from, the visitor's device.

RB2B says GDPR doesn't apply because it only tracks US-based visitors. That is RB2B's own claim. Your site's tracking script still loads for UK and EU visitors, and the consent question under PECR applies to how your site uses it.

> **Warning:** Gate visitor identification scripts behind consent where the law requires it, and keep person-level tools to the markets where they operate. RB2B identifies people only in the US.

For HubSpot users the practical steps are short. Load the tracking script through your consent banner, record which tool runs on which pages, and keep identified data out of HubSpot for visitors who refuse consent.

This section is general information, not legal advice.

## Frequently Asked Questions

RB2B and Warmly both write to their own properties on existing HubSpot records, and each documents what it leaves alone.

**Can visitor identification tools overwrite HubSpot data?**

The rules differ by tool. RB2B says it will never overwrite a contact's existing data and updates only RB2B properties on existing records. Warmly fills standard company fields only when empty, never overwrites Website, never changes a set owner, and always overwrites its own Warmly fields. Leadfeeder cannot enrich companies already in HubSpot.

**Which visitor identification tool identifies individual people?**

RB2B and Warmly identify individual people among the five tools here. RB2B gives name, title, LinkedIn profile and email for US visitors only, with company-level identification worldwide. Warmly creates contact records for identified visitors and matches them to HubSpot contacts by email. Leadfeeder, Snitcher and Leadinfo work mainly at company level.

**Can Leadfeeder connect to more than one CRM?**

No. Leadfeeder allows one CRM per account, so a team running HubSpot alongside another CRM has to pick one for the sync. Within HubSpot, Leadfeeder connects companies and deals, adds visits as notes and charges 1 credit for each record it sends. Existing HubSpot companies cannot be enriched.

**What happens to Warmly after the HubSpot acquisition?**

Little changes straight away for current customers. HubSpot agreed to acquire Warmly in a deal announced on 30 June 2026, and contracts, pricing, account teams, product experiences and integrations stay unchanged for current customers. Deeper HubSpot integration is planned, and Warmly's Inbound Agent and TAM Agent join HubSpot's AI portfolio.

## Our Verdict

For most HubSpot teams the decision comes down to records. Warmly suits owner-aware person and company data, Leadfeeder suits cautious company matching, and RB2B suits named US contacts.

**Verdict.** Pick Warmly if you run HubSpot only and want owner-aware person and company data. Pick Leadfeeder for cautious company matching with visit notes. Pick RB2B, on Pro or Pro+, for named US contacts. Pick Snitcher for ICP-only syncs into custom properties. Pick Leadinfo if you are a European team wanting registry-aware matching. Whichever you choose, set matching and sync filters before the first sync, because HubSpot will not deduplicate the companies a sync app creates.

## Sources

- [Deduplication of records - HubSpot Knowledge Base](https://knowledge.hubspot.com/records/deduplication-of-records), knowledge.hubspot.com
- [HubSpot Acquires Warmly to Boost AI Sales Agents - CMSWire](https://www.cmswire.com/digital-experience/hubspot-acquires-warmly-to-boost-ai-sales-agents/), cmswire.com
- [Use buyer intent - HubSpot Knowledge Base](https://knowledge.hubspot.com/reports/use-buyer-intent), knowledge.hubspot.com
- [What are the PECR rules? - ICO](https://ico.org.uk/for-organisations/direct-marketing-and-privacy-and-electronic-communications/guidance-on-the-use-of-storage-and-access-technologies/what-are-the-pecr-rules/), ico.org.uk

---
Source: https://growthtribune.com/best-visitor-identification-tools-for-hubspot/
